20 watt LED T8 T10 Tube for 48" 4FT fluorescent replacement, no ballast no UV & IR white By Ledwholesalers, 2043WH Review

Average Reviews:

(More customer reviews)I had a florescent fixture with two tubes that didn't work. The bulbs were about 10 years old and the ballast, which failed, was older. Rather than replace the bulbs and ballast I decided to give these LED tubes a try. They work and provide a comparable amount of light. The light is cooler and not greenish like many florescent lights. I personally like the quality of the light. To me it feels more like day light. These tubes fit the standard fixture but you must remove the ballast and wire directly to your household wire. All the wires going to one side of the fixture (one end of the tubes), is wired to the black wire (hot) and the other wires to the other end of the tubes is connected to the white wire. I cut the wires coming out of the balast (yellow on the left end and blue and red on the right end). TURN OFF the current to the fixture at the circuit box. It isn't worth electrocuting yourself to save energy. The wiring is easy but the reason I gave this 4 stars instead of 5 is that this requires more than just removing old tubes and putting these in their place. For some people, the wiring part may be daunting.
Assuming these bulbs are dependable, they seem like a very decent option. The cost of electricity in my case is about half of the bulbs they replaced but that will take many years to recoup the original sixty dollar price of each bulb. I must admit that I did it because I prefer the quality of the light and didn't like the interference of the ballast/florescent bulbs on my radio and sound system.
Addendum: of four tubes, one was dead on arrival. Waiting for replacement.

Click Here to see more reviews about: 20 watt LED T8 T10 Tube for 48" 4FT fluorescent replacement, no ballast no UV & IR white By Ledwholesalers, 2043WH

This 48" led tube is a direct, "drop-in" replacement for standard fluorescent light tubes. It is compatible with virtually every standard ballast equipped fluorescent light fixture. To install, simply by pass the existing ballast and connect the hot wire to one end and the neutral wire to the other end. Features: No Flickering Instance Turn On No buzzing ballasts Hi Efficient Output (85-100 Lumen Per Watt) Save 60% power consumption comparing with the fluorescent light. Real replacement for the traditional T8 fluorescent light with no need maintain cost. Ideal for all energy saving application

Get 28% OFF

Buy cheap 20 watt LED T8 T10 Tube for 48" 4FT fluorescent replacement, no ballast no UV & IR white By Ledwholesalers, 2043WH now.